TTulpe Seano 30 Smart flat water heater for universal wall-mounting

TTulpe Seano 30 Smart – Flat 30 L Electric Water Heater with Universal Mounting

The TTulpe Seano 30 Smart is a modern flat electric storage water heater with a 30 litre capacity, intelligent SMART control and flexible universal mounting. Thanks to its dual-tank construction and slim depth of only 280 mm, the Seano 30 can be installed both vertically and horizontally.

With a heating power of 1800 W, electronic controls, an intelligent SMART energy-saving programme and an anti-legionella function, the Seano 30 combines everyday hot water comfort with efficient operation.

Its distinctive anthracite finish gives the water heater a modern and premium appearance, making it particularly suitable for installations where the appliance remains visible.

Flat dual-tank design

The TTulpe Seano 30 uses two cylindrical internal tanks housed inside a slim outer casing.

This dual-tank construction allows the appliance to achieve a depth of only 280 mm, making it considerably flatter than many conventional cylindrical storage water heaters.

The Seano 30 is particularly suitable for:

Bathrooms

Apartments and studios

Holiday homes

Chalets and lodges

Kitchens

Utility rooms

Offices

Small commercial premises

Locations with limited installation depth

Universal mounting – vertical or horizontal

One of the main advantages of the TTulpe Seano 30 Smart is its universal mounting capability.

The water heater can be installed:

Vertically, with the water connections pointing downwards

Horizontally, with the water connections pointing to the left

This provides much greater flexibility when selecting the best installation location.

Whether you have more vertical or horizontal wall space available, the Seano 30 can be adapted to suit the room.

30 litre capacity

The TTulpe Seano 30 has a 30 litre water capacity, providing a practical amount of stored hot water for smaller domestic applications.

It is an excellent choice when a compact 10 or 15 litre water heater does not provide enough hot water, while a 50 or 80 litre storage heater would be unnecessarily large.

Suitable applications include:

Showering

Washbasins

Kitchen sinks

Hand washing

Cleaning

Smaller sanitary applications

1800 W heating power

The TTulpe Seano 30 is equipped with an 1800 W / 1.8 kW heating element.

The appliance operates on a 220–240 V, 50/60 Hz electrical supply.

With a temperature increase of 45°C, the average heating time is approximately 53 minutes.

The water temperature can be adjusted up to a maximum of 80°C.

Intelligent SMART energy-saving programme

The Seano 30 is equipped with an intelligent SMART programme designed to reduce unnecessary energy consumption.

The SMART function monitors hot water usage and adapts the heating behaviour to typical usage patterns.

Instead of unnecessarily maintaining the entire water volume at a high temperature throughout the day, the system can reduce heating during periods when little or no hot water is normally required.

This helps combine:

Comfortable hot water availability

Automatic operation

Reduced unnecessary heating

More efficient energy consumption

Electronic display and easy operation

The TTulpe Seano 30 features a clear electronic control display.

The control panel allows you to manage important functions such as:

Water temperature

SMART mode

Anti-legionella function

On/off operation

Temperature monitoring

The electronic controls make the water heater straightforward to operate while providing more control than a traditional mechanically controlled storage heater.

Anti-legionella function

The Seano 30 includes an anti-legionella function.

This function is designed to periodically increase the water temperature as part of the water heater's hygiene management.

It provides an additional feature for users who want a modern storage water heater with automated temperature management.

BIO-glasslined internal tanks

The internal steel tanks are manufactured according to the BIO-glasslined principle.

The durable enamel coating helps protect the steel tanks against corrosion and contributes to a long service life.

A magnesium anode provides additional corrosion protection inside the water heater.

Superfoam thermal insulation

The TTulpe Seano 30 is equipped with high-quality Superfoam thermal insulation.

This insulation helps minimise heat loss from the stored water after it has reached the selected temperature.

As a result, the heating element needs to operate less frequently to maintain the desired temperature.

Energy efficiency class B

Thanks to its effective insulation, flat dual-tank construction and intelligent SMART programme, the TTulpe Seano 30 achieves energy efficiency class B.

The specified annual energy consumption is approximately 488 kWh, depending on operating conditions and usage.

Pressurised storage water heater

The TTulpe Seano 30 is a pressurised electric storage water heater designed for connection to a standard pressurised water supply.

The water connections are standard ½ inch.

The appliance is supplied with an inlet safety combination / 3-way safety valve that combines several important functions:

Pressure relief valve

Non-return valve

Drain valve

This helps protect both the water heater and the connected plumbing system.

Stylish anthracite finish

Unlike many traditional white electric water heaters, the TTulpe Seano 30 is finished in anthracite.

This darker finish gives the appliance a distinctive, modern appearance and makes it an attractive choice when the water heater is installed in a visible location.

Compact dimensions

Thanks to its flat design, the Seano 30 requires relatively little installation depth.

Vertical installation:

575 × 516 × 280 mm (H × W × D)

Horizontal installation:

516 × 575 × 280 mm (H × W × D)

The empty weight is approximately 18.5 kg.

SMART control without Wi-Fi

The TTulpe Seano 30 Smart does not have Wi-Fi or app control.

The SMART energy-saving function operates directly through the electronics built into the water heater.

No smartphone, app or wireless network is therefore required to benefit from the intelligent SMART programme.

Key features

Brand: TTulpe

Series: Seano

Model: Seano 30 Smart

Product code: TTSEA30

EAN: 8719689676728

Capacity: 30 litres

Power: 1800 W / 1.8 kW

Voltage: 220–240 V / 50–60 Hz

Electric storage water heater

Flat design

Dual cylindrical internal tanks

Universal mounting

Vertical installation

Horizontal installation

Electronic controls

Electronic display

SMART energy-saving programme

Anti-legionella function

Temperature indicator

Adjustable water temperature

Maximum temperature: 80°C

Heating time at ΔT 45°C: approx. 53 minutes

BIO-glasslined internal tanks

Magnesium anode

Superfoam thermal insulation

Pressurised operation

Water connections: ½ inch

Protection rating: IPX4

Energy efficiency class: B

Annual energy consumption: approx. 488 kWh

Colour: Anthracite

Depth: only 280 mm

Vertical dimensions: 575 × 516 × 280 mm

Horizontal dimensions: 516 × 575 × 280 mm

Empty weight: approx. 18.5 kg

No Wi-Fi / app control

2-year appliance warranty

5-year tank warranty

Why choose the TTulpe Seano 30 Smart?

The TTulpe Seano 30 Smart is an excellent choice if you are looking for a flat 30 litre electric water heater that combines flexible installation, intelligent energy management and distinctive styling.

Its dual-tank design keeps the appliance to only 280 mm deep, while the possibility of vertical or horizontal mounting makes it easy to adapt to different spaces.

The intelligent SMART programme helps reduce unnecessary heating, while the electronic controls and anti-legionella function provide additional convenience.

Combined with its BIO-glasslined tanks, magnesium anode, Superfoam insulation, energy efficiency class B and modern anthracite finish, the Seano 30 is a practical and stylish solution for everyday hot water.

Included with this product:

User manual

Wall anchors

Inlet safety combination / 3-way safety valve

The 3-way safety valve combines:

Pressure relief valve

Non-return valve

Drain valve