TTulpe SmartMaster 30 - flat electric storage water heater with smart control

TTulpe SmartMaster 30 – Flat Electric Water Heater 30 L with Smart Control

The TTulpe SmartMaster 30 is a high-quality, extra-flat electric storage water heater with intelligent Smart Control, designed to provide comfortable and energy-efficient hot water. Thanks to its dual-tank construction, the unit is only 250 mm deep and can be installed both vertically and horizontally.

The SmartMaster 30 belongs to the 30 litre class and has a net water capacity of 28 litres. With a maximum power output of 2000 W, intelligent SMART control and several manual heating modes, this model is ideal for bathrooms, apartments, studios, holiday homes and other areas where installation space is limited.

Extra-flat dual-tank design

The TTulpe SmartMaster 30 uses two separate internal tanks instead of one large cylindrical tank.

This allows the appliance to be only 250 mm deep, so it projects significantly less from the wall than many traditional cylindrical water heaters.

The SmartMaster 30 is particularly suitable for:

Bathrooms

Apartments and studios

Holiday homes

Chalets and lodges

Kitchens

Utility rooms

Offices

Small commercial premises

Locations with limited installation depth

Universal mounting: vertical or horizontal

A major advantage of the TTulpe SmartMaster 30 is its flexible mounting system.

The water heater can be installed:

Vertically, with the water connections pointing downwards

Horizontally, with the water connections pointing to the left

This allows the appliance to be adapted easily to the available wall space and room layout.

28 litre net water capacity

The TTulpe SmartMaster 30 belongs to the 30 litre class and provides a net water capacity of 28 litres.

This capacity is ideal when a small 10 or 15 litre water heater is insufficient, while a larger 50 or 80 litre model would be unnecessarily large.

The water heater can be used for applications such as:

Showering

Washbasins

Kitchen sinks

Hand washing

Cleaning

Smaller sanitary applications

Intelligent SMART programme

One of the key features of the SmartMaster 30 is its intelligent SMART control.

In SMART mode, the water heater analyses hot water usage over a recurring 7-day cycle.

Based on this usage pattern, the appliance adapts its operation and prepares hot water around the times when it is normally required.

During periods of low or no hot water demand, the water can be maintained at a lower minimum temperature.

This helps prevent the complete hot water supply from being unnecessarily kept at a high temperature at all times.

Benefits of SMART mode include:

Hot water available around typical usage times

Automatic adjustment

Reduced unnecessary reheating

More efficient energy consumption

Manual operation also available

In addition to the intelligent SMART function, the TTulpe SmartMaster 30 can also be operated manually.

Using the simple controls and rotary dial, you can easily select how the water heater should operate.

Available operating options include:

One heating element for more economical operation

Both heating elements for faster heating

SMART mode for automatic adjustment to hot water usage

This allows you to choose between lower energy consumption and faster heating depending on your needs.

Maximum power of 2000 W

The TTulpe SmartMaster 30 has a maximum electrical power output of 2000 W / 2 kW.

The water heater operates on a standard 230 V connection.

With a temperature increase of 45°C, the heating time is approximately 38 minutes.

The maximum water temperature is 75°C.

Suitable for use with an external timer

The SmartMaster 30 can also be used with an external timer switch.

After a power interruption, the water heater remembers the last selected setting.

This makes it possible to control the power supply using an external timer if you only want the appliance to operate during specific periods.

Suitable for hard water areas

An important advantage of the SmartMaster range is that not only the internal tanks, but also the heating elements are enamelled.

This additional protection makes the SmartMaster particularly suitable for areas with relatively hard water.

The ceramic protective coating helps protect both the tanks and heating elements and contributes to a longer service life.

Two extra-large magnesium anodes

The TTulpe SmartMaster 30 is equipped with two extra-large magnesium anodes.

These anodes help protect the steel internal tanks against corrosion and work together with the enamel coating to provide effective corrosion protection.

This combination is designed to improve durability and extend the life of the water heater.

Energy efficiency class B

Thanks to its effective thermal insulation and intelligent SMART control, the TTulpe SmartMaster 30 achieves energy efficiency class B.

The insulation reduces heat loss from the stored water, while the SMART function helps avoid unnecessary continuous heating.

Pressurised storage water heater

The TTulpe SmartMaster 30 is a pressurised electric storage water heater.

The operating pressure ranges from 0.1 to 0.75 MPa, with a maximum operating pressure of 7.5 bar.

The water connections are standard ½ inch.

When installed correctly, the appliance can therefore be connected to a standard pressurised water supply.

Compact dimensions

Thanks to its extra-flat dual-tank construction, the SmartMaster 30 requires very little installation depth.

Dimensions when installed vertically:

575 × 470 × 250 mm (H × W × D)

Dimensions when installed horizontally:

470 × 575 × 250 mm (H × W × D)

The empty weight is approximately 20 kg.

Smart Control without Wi-Fi

The TTulpe SmartMaster 30 features Smart Control but does not have Wi-Fi control.

The intelligent system operates entirely through the electronics built into the water heater.

No app, smartphone or Wi-Fi connection is therefore required to use the SMART function.

Key features

Brand: TTulpe

Series: SmartMaster

Model: SmartMaster 30

Product code: TTSMMA30

EAN: 8719689676322

30 litre class

Net water capacity: 28 litres

Power: 2000 W / 2 kW

Voltage: 230 V

Electric storage water heater

Extra-flat design

Depth: only 250 mm

Dual-tank construction

Vertical and horizontal mounting

Electronic controls

User-friendly rotary dial

SMART energy-saving programme

Self-learning 7-day cycle

Manual operation available

ECO heating with one heating element

Fast heating with two heating elements

Suitable for external timer

Remembers last setting after power failure

Enamelled internal tanks

Enamelled heating elements

Suitable for hard water areas

Two extra-large magnesium anodes

Adjustable water temperature

Maximum temperature: 75°C

Heating time at ΔT 45°C: approx. 38 minutes

Pressurised operation

Maximum operating pressure: 7.5 bar / 0.75 MPa

Water connections: ½ inch

Protection rating: IPX4

Energy efficiency class: B

Colour: White

Vertical dimensions: 575 × 470 × 250 mm

Horizontal dimensions: 470 × 575 × 250 mm

Empty weight: approx. 20 kg

No Wi-Fi control

Why choose the TTulpe SmartMaster 30?

The TTulpe SmartMaster 30 is an excellent choice if you are looking for a high-quality flat water heater that combines comfort, flexible installation and intelligent energy control.

With a depth of only 250 mm, the appliance takes up very little space. Thanks to the option for vertical or horizontal mounting, it can also be adapted easily to different room layouts.

The SMART function analyses hot water usage and helps reduce unnecessary heating. At the same time, you can still operate the water heater manually and choose between one or two heating elements.

The combination of enamelled tanks, enamelled heating elements and two extra-large magnesium anodes makes the SmartMaster particularly attractive where durability and protection against limescale and corrosion are important.

Included with this product:

Power cable with plug

3-way safety valve / inlet safety combination

User manual

2 wall anchors / wall hooks