The TTulpe Verlo 30 Smart is a modern, flat electric storage water heater with a 30 litre capacity, designed to offer maximum flexibility during installation. Thanks to its dual-tank construction and slim depth of only 280 mm, this water heater can be installed both vertically and horizontally.
With a power output of 1800 W, electronic controls and an intelligent SMART programme, the Verlo 30 combines hot water comfort with a compact design and efficient energy use.
This model is particularly suitable for apartments, studios, holiday homes, bathrooms, kitchens and other locations where available installation space is limited.
The TTulpe Verlo 30 uses two cylindrical internal tanks housed inside a flat outer casing.
This design results in a depth of only 280 mm, which is considerably slimmer than many conventional cylindrical storage water heaters.
The Verlo 30 can therefore be installed in locations where a traditional round water heater would take up too much space.
Suitable for applications including:
Apartments and studios
Bathrooms
Kitchens
Utility rooms
Holiday homes
Chalets and lodges
Offices
Small commercial premises
Locations with limited installation depth
One of the main advantages of the TTulpe Verlo 30 Smart is its universal mounting capability.
The water heater can be installed:
Vertically, with the water connections at the bottom
Horizontally, with the water connections on the left-hand side
This provides excellent flexibility when adapting the unit to the available space.
Whether you have a tall, narrow wall or more horizontal space available, the Verlo 30 offers a practical installation solution.
With a storage capacity of 30 litres, the TTulpe Verlo 30 provides a practical amount of hot water for smaller domestic applications.
This model is particularly useful when a compact 10 or 15 litre water heater is too small, while a 50 or 80 litre storage tank would be unnecessarily large.
Suitable applications include:
Shower
Washbasin
Kitchen sink
Hand washing
Cleaning
Smaller sanitary applications
The TTulpe Verlo 30 is equipped with an electric heating element rated at 1800 W / 1.8 kW.
With a temperature increase of 45°C, the heating time is approximately 53 minutes.
The water temperature can be adjusted up to a maximum of 80°C.
The Verlo 30 features an intelligent SMART programme.
This function analyses hot water usage over a 7-day cycle. The water heater can then adapt its heating pattern to the times when hot water is normally required.
During periods of little or no hot water demand, the system can maintain the water at a lower temperature.
This helps reduce unnecessary heating while maintaining everyday hot water comfort.
The TTulpe Verlo 30 features straightforward electronic controls.
The control panel allows you to:
Adjust the desired water temperature
Activate the SMART programme
Monitor the temperature
Switch the water heater on or off
The electronic control system provides greater control over operation than a traditional mechanically controlled storage water heater.
The internal tanks are manufactured using the BIO-glasslined principle.
The steel tanks feature a protective enamel coating designed to help protect against corrosion and contribute to a long service life.
A magnesium anode provides additional corrosion protection for the internal tanks.
The TTulpe Verlo 30 features high-quality Superfoam thermal insulation.
This insulation reduces heat loss from the stored water.
As a result, the heating element needs to switch on less frequently to maintain the selected temperature, helping to improve energy efficiency.
Thanks to its effective insulation, efficient construction and SMART programme, the TTulpe Verlo 30 achieves energy efficiency class B.
This provides a good balance between hot water comfort and efficient energy consumption.
The TTulpe Verlo 30 is designed for connection to a pressurised water system.
The water connections are ½ inch.
A 3-way safety valve is supplied with the water heater and combines several important functions:
Pressure relief
Non-return valve
Drain function
The safety valve helps protect both the water heater and the installation against excessive pressure.
With a depth of only 280 mm, the Verlo 30 is particularly suitable for locations where a conventional cylindrical water heater would project too far from the wall.
Dimensions when installed vertically:
575 × 516 × 280 mm (H × W × D)
Dimensions when installed horizontally:
516 × 575 × 280 mm (H × W × D)
The empty weight is approximately 18.5 kg.
Brand: TTulpe
Series: Verlo
Model: Verlo 30 Smart / TTVER30
Capacity: 30 litres
Power: 1800 W / 1.8 kW
Voltage: 220–240 V
Electric storage water heater
Flat design
Dual internal tank
Universal mounting
Vertical or horizontal installation
Electronic control
SMART programme
Self-learning 7-day cycle
Adjustable water temperature
Maximum temperature: 80°C
Heating time at ΔT 45°C: approx. 53 minutes
BIO-glasslined internal tanks
Magnesium anode
Superfoam thermal insulation
Water connections: ½ inch
Energy efficiency class: B
Colour: white
Depth: only 280 mm
Vertical dimensions: 575 × 516 × 280 mm
Horizontal dimensions: 516 × 575 × 280 mm
Empty weight: approx. 18.5 kg
Product code: TTVER30
EAN: 8719689676681
The TTulpe Verlo 30 Smart is an excellent choice if you are looking for a compact 30 litre water heater without being restricted to a single mounting position.
Its flat dual-tank construction keeps the installation depth to a minimum, while the option for vertical or horizontal mounting provides excellent flexibility.
The combination of the SMART programme, electronic controls, BIO-glasslined tanks, Superfoam insulation and energy efficiency class B makes the Verlo 30 a modern and practical solution for everyday hot water.
User manual
Wall anchors
3-way safety valve