Eldom Eureka 50, 1.6 KW, dry heating

Eldom Eureka 50 – 50 L Electric Water Heater 1.6 kW with Dry Heating

The Eldom Eureka 50 is a 50 litre electric storage water heater equipped with two dry heating elements of 800 W each. The elements operate together and provide a fixed total heating power of 1600 W / 1.6 kW.

The dry heating technology separates the heating elements from direct contact with the water. This reduces direct limescale build-up on the elements and makes the Eureka 50 particularly suitable for areas with hard or mineral-rich water.

Dry heating technology

The Eldom Eureka 50 uses two dry tubular heating elements installed inside protective sleeves.

Heating elements: 2 × 800 W.

Total heating power: 1600 W / 1.6 kW.

Power adjustment: not available.

The two elements are not individually switchable and operate as one 1600 W heating system.

Because the heating elements do not come into direct contact with the stored water, scale cannot form directly on their surface in the same way as with conventional immersion heaters.

Suitable for hard-water areas

The dry heating system makes the Eureka 50 particularly interesting in locations where limescale can cause problems for conventional electric water heaters.

The protected heating elements are less exposed to mineral deposits, which helps preserve heating performance and can simplify maintenance.

50 litre hot water capacity

Nominal capacity: 50 litres.

Mixed water volume at 40°C: approximately 70 litres.

The actual usable amount of hot water depends on the storage temperature, incoming cold water temperature and mixing ratio at the tap.

Typical applications include:

• Showering

• Washbasins

• Kitchen sinks

• Small households

• Apartments

• Holiday homes

• Additional hot water supply

Fixed 1600 W heating power

Heating power: 1600 W / 1.6 kW.

Voltage: 230 V.

The heating power is fixed and cannot be reduced or selected separately between the two heating elements.

The two 800 W dry elements work together whenever the appliance is heating.

Mechanical temperature control

The Eldom Eureka 50 uses a straightforward mechanical control system.

Temperature control: mechanical thermostat.

Illuminated on/off switch: yes.

Temperature indication: yes.

The absence of Wi-Fi, apps and digital programming keeps operation simple and easy to understand.

Zirconium-enamelled internal tank

The steel internal tank is protected with a durable enamel coating containing an increased level of zirconium.

This coating forms a protective barrier between the stored water and the steel tank and contributes to corrosion resistance.

Magnesium anode

Anode type: magnesium.

The magnesium anode provides additional electrochemical corrosion protection for the enamelled tank.

Periodic inspection of the anode is recommended as part of normal maintenance.

Thermal insulation

The Eureka 50 uses closed-cell polyurethane insulation to reduce heat loss from the stored water.

The insulation helps maintain the water temperature between heating cycles and limits unnecessary reheating.

Energy efficiency

Energy efficiency class: C.

Load profile: M.

The appliance is designed as a traditional mechanically controlled storage water heater with a focus on durable construction and dry heating technology.

Pressurised operation

The Eldom Eureka 50 is a pressurised electric storage water heater suitable for connection to a standard mains water supply.

Maximum operating pressure: 0.7 MPa / 7 bar.

Water connections: ½ inch.

A 3-way safety valve is supplied with the water heater to provide pressure relief and non-return protection.

Safety system

The Eureka 50 incorporates Eldom’s multi-level protection system.

Protection rating: IP24.

The safety system includes temperature and pressure protection for reliable everyday operation.

Vertical wall mounting

Mounting orientation: vertical.

The wall mounting bracket is pre-fitted to the appliance.

Wall anchors: not included.

Power cable: not included.

Dimensions

Dimensions: 760 × 387 × 410 mm.

Height: 760 mm.

Width: 387 mm.

Depth: 410 mm.

Net weight: approximately 21 kg.

Colour: white.

Shape: cylindrical.

Technical specifications

Brand: Eldom

Series: Eureka

Model: WVF05039FD

EAN: 3800035754919

Capacity: 50 litres

Mixed water volume at 40°C: approximately 70 litres

Heating technology: dry heating

Heating elements: 2 × 800 W

Total heating power: 1600 W / 1.6 kW

Individually switchable elements: no

Adjustable heating power: no

Voltage: 230 V

Mounting: vertical

Control: mechanical

Internal tank: zirconium-enamelled

Anode: magnesium

Maximum operating pressure: 0.7 MPa / 7 bar

Water connections: ½ inch

Protection rating: IP24

Energy efficiency class: C

Load profile: M

Wi-Fi: no

SMART programme: no

Dimensions: 760 × 387 × 410 mm

Net weight: approximately 21 kg

Why choose the Eldom Eureka 50?

The Eldom Eureka 50 is especially suitable for users looking for a conventional 50 litre water heater with improved resistance to limescale around the heating system.

Its two dry 800 W heating elements operate together at a fixed 1600 W, while the zirconium-enamelled tank and magnesium anode provide additional protection against corrosion.

The simple mechanical controls, vertical installation and dry heating construction make the Eureka 50 a practical choice for everyday hot water production, particularly in hard-water areas.

Included with this product

• Eldom Eureka 50 water heater

• User manual

• 3-way safety valve / inlet safety combination

• Pre-fitted wall mounting bracket

Wall anchors: not included.

Power cable: not included.