ELDOM Eureka 80, 2 KW, dry heating

Eldom Eureka 80 – 80 L Electric Water Heater 2 kW with Dry Heating

The Eldom Eureka 80 is an 80 litre electric storage water heater with two dry heating elements of 1000 W each and a total heating power of 2000 W. Thanks to its Dry Heating technology, the heating elements do not come into direct contact with the water.

This significantly reduces direct limescale build-up on the elements and makes the Eureka 80 particularly suitable for areas with hard or mineral-rich water.

Dry Heating technology

The two heating elements are installed inside protective sleeves and are separated from the stored water.

Heating elements: 2 × 1000 W.

Total heating power: 2000 W / 2 kW.

Because the elements are not immersed directly in the water, they are less exposed to limescale and mineral deposits. This helps maintain heating performance and can extend the service life of the heating system.

Easier maintenance

An important advantage of the dry heating design is that the heating elements can be serviced or replaced without draining the entire water heater first.

This makes maintenance easier compared with many conventional immersion-heater systems.

80 litre capacity for everyday hot water use

Capacity: 80 litres.

The Eureka 80 is suitable for households of approximately 2 to 3 people, depending on shower habits and overall hot water consumption.

Its capacity makes it suitable for applications such as:

• Showers

• Washbasins

• Kitchen sinks

• Apartments

• Holiday homes

• Small households

• Additional domestic hot water supply

Mechanical temperature control

The water temperature is adjusted using an external mechanical thermostat.

Control: mechanical.

Temperature indicator: yes.

Illuminated on/off switch: yes.

Wi-Fi: no.

SMART programme: no.

The straightforward control system is ideal for users who do not require app control, digital scheduling or advanced programming.

Zirconium-enamelled internal tank

The steel internal tank is protected by a durable enamel coating with increased zirconium content.

This protective layer helps prevent direct contact between the stored water and the steel tank and is designed to withstand the temperature changes that occur during normal operation.

Two magnesium anodes

Corrosion protection: 2 magnesium anodes.

The two anodes provide additional electrochemical protection for the internal tank. Periodic inspection and replacement when necessary help preserve the service life of the appliance.

35 mm thermal insulation

Insulation thickness: approximately 35 mm.

The polyurethane insulation surrounding the tank helps reduce standby heat loss and keeps the stored water warm for longer between heating cycles.

Pressurised installation

The Eldom Eureka 80 is a pressurised electric storage water heater designed for connection to a standard mains water supply.

Maximum operating pressure: 0.7 MPa / 7 bar.

Water connections: ½ inch.

A combined 3-way safety valve is supplied with the appliance and provides pressure relief and non-return protection.

6-level safety system

The Eureka series uses Eldom’s multi-level safety system for reliable everyday operation.

Overtemperature protection: yes.

Protection rating: IP24.

The system is designed to protect the appliance against conditions such as overheating and excessive pressure.

Vertical wall mounting

Mounting: vertical only.

The wall mounting bracket is pre-fitted to the appliance.

Wall anchors: not included.

Power cable: not included.

Technical specifications

Brand: Eldom

Series: Eureka

Model: WVF08046FD

EAN: 3800035754926

Capacity: 80 litres

Heating technology: Dry Heating

Heating elements: 2 × 1000 W

Total power: 2000 W / 2 kW

Voltage: 230 V

Current: approximately 9 A

Mounting: vertical

Control: mechanical

Internal tank: zirconium-enamelled / BIO-glasslined

Anodes: 2 magnesium anodes

Insulation: approximately 35 mm polyurethane foam

Maximum operating pressure: 0.7 MPa / 7 bar

Water connections: ½ inch

Protection rating: IP24

Energy efficiency class: C

Load profile: M

Annual energy consumption: approximately 1366 kWh

Frost protection: yes

Anti-legionella programme: no

Wi-Fi: no

SMART programme: no

Programmable timer: no

Colour: white

Dimensions: approximately 835 × 462 × 484 mm

Net weight: approximately 27 kg

Why choose the Eldom Eureka 80?

The main advantage of the Eldom Eureka 80 is the combination of an 80 litre capacity and Dry Heating technology.

The protected heating elements are less affected by limescale, while the zirconium-enamelled tank and two magnesium anodes provide additional corrosion protection.

This makes the Eureka 80 a practical choice for users looking for a durable, straightforward and maintenance-friendly water heater, especially in hard-water areas.

Included with this product

• Eldom Eureka 80 water heater

• User manual

• 3-way safety valve / inlet safety combination

• Pre-fitted wall mounting bracket

Wall anchors: not included.

Power cable: not included.